Partition panel safety technology disclosure
Jun 11, 2022
1. Safety measures
1. All operators must wear safety helmets correctly.
2. When the construction height exceeds 1.5m, a horse bench or an operating platform should be erected. When a large wall is constructed, a scaffold should be erected, and workers at high places should wear safety belts. The erection of the scaffold should meet the construction safety standards.
3. When hoisting or transporting horizontally, the board should stand on its side, and use special tools. Do not use steel pipes to directly pass through the round holes of the partition board; iron wires and ropes for handling should be fastened to prevent the partition board from falling off and hurting people.
4. Strictly abide by the operating rules of various machinery, special types of work must hold certificates, and non-operators are not allowed to operate tools indiscriminately to prevent injury. When piercing the nail gun, wear gloves, dress neatly, the nail gun muzzle is not allowed to face the person, and the hand cannot touch the nail gun muzzle. If you need to use a ladder, you must ensure that the ladder is firmly fixed. Before using the cutting saw, check whether the fasteners are loose, whether the cutting blade is damaged or cracked, and determine in advance whether the rotation direction of the wheel is consistent with the direction of the protective cover, and must not rotate in the opposite direction. The side of the machine should not be cut directly with the dicing saw, and the force should be even and steady. Do not use too much force, so as not to cause the disc to crack.
5. Electromechanical appliances must be installed with electric shock protection devices, and repaired in time when problems are found. No illegal operation or brutal construction is allowed.
6. It is not allowed to connect the wires indiscriminately in the construction operation surface. Before use, an electrician must check whether the line and equipment are in good condition. After checking, it can be used. After use, cut off the power in time.
7. Actively cooperate with the civil construction team to coordinate the vertical transportation at night in a timely manner. Do not use tower cranes and mixers without permission to prevent safety accidents.
8. Measures must be taken to cover the upper pipe well hole during the construction of sanitary partition wall panels to prevent falling objects from hurting people.
9. No open fire shall be used on the construction site to prevent fire. If it is necessary to use an open fire, it must be reported to the project department and a fire permit issued by the security officer of the project department, equipped with a fire extinguisher, a special person responsible for watching the fire, and an open fire in the square mouth.
10. When installing the partition board, the construction personnel should try not to stand on both sides of the partition board as much as possible. If it is really necessary to construct here, protective measures must be taken, and steel pipes are used as temporary support to prevent the partition board from overturning and hurting people.
2. Finished product protection
1. When hoisting and transporting, the board should stand on its side, and use special tools. Do not use steel pipes to directly pass through the round holes of the partition board; iron wires, ropes and other tools for handling should be fastened to prevent the partition board from falling off and hurting people.
2. After the partition board is filled with fine stone concrete, it is not allowed to lean on objects and dig holes on the partition board within three days to prevent the wall board from loosening and cracking.
3. The construction site must be cleared after completion
