What should be paid attention to when installing composite wall panels
Jun 20, 2022
1. Draw a line on the installation part of the wall panel, so that this line is perpendicular to the beam of the house. At the same time, we must ensure that the material of the composite wall panel is kept flat, and although the lightweight wall panel is very light in weight, But it also requires at least two people to move it.
2. Next, reconcile the cement, and at the same time add some sand to the cement, and then stir the cement into a paste with a stirring rod, so that the specific shapes of the cement and sand will not be separated, and then brush the composite wallboard with water first. Once again, let it become wet on its own surface, and then lightly brush a layer of it with the mixed mortar.
4. Put the prepared composite wall panel on the position to be installed, and then stand up. At this time, you need to align the position of the beam line, and then use a shovel to lift the lightweight wall panel from the bottom, so that the There is no gap between the two boards. At the same time, it is necessary to use a hammer to hit the wall panel and the wall panel forcefully. Use the cement that has been mixed in the front to ensure that the joints of the two panels are not covered with cement. At the same time, make sure that no gap is left, and then use wood Wedge the nails to fix him temporarily, so that the general work is basically completed.
